The 5 Rules of Options And How Learn More
Costs of Adding Heat and Brake Capabilities to Non-Heated Paint Booths
Choosing the right spray paint booth can be quite tricky. The term can mean anything, from a plain space with a fan to a high-tech booth with a complex system and varied features. Of course, you will have to choose depending on your needs.
If you’ve been reading about spray paint booths, you may have learned that they come in different types, such as crossdraft, downdraft, semi-downdraft and side-draft. But if you’re thinking of adding heat and brake capabilities to a non-heated spray paint booth, you need to seriously consider the move, especially its impact on your total costs.
While custom shops may not call for upgrades, you may need one if volume will likely become part of your business model. As you add heat to your paint booth, it’s important to be able to recycle it, saving you thousands of dollars yearly.
The cheaper the spray paint booth, the most expensive it usually is to retrofit. You cannot supply heat through the doors of a cross-draft booth, for instance. That will be prohibitively expensive and it will require big alterations. In a similar way,installing a heat recycle in specific cross-draft booths can be done, but the cost will be through the roof.
Semi-downdraft booths are relatively simpler to retrofit when you want to add heat. You will need very little metal customization or on-site work, which means installation and labor costs will be minimal.
Adding heat recycle is going to be difficult and expensive due to the exhaust’s location at the rear of the booth. Definitely, substantial amounts of ductwork will be needed. When it comes to side downdraft spray paint booths, retrofitting with heat is easier since the ducts run along the sidewalls. As the heater can be connected to the exhaust duct at any location, adding heat recycling is equally easy. Depending on the layout, downdraft booths also come easy in terms of adding heat and heat recycling. Installation and labor costs can be kept to a minimum, considering changes to the cabin will not be required.
In any case, the booth should have ample space where you can add heat in the future. Your building should have the right electric load, and be aware of where the power will be run so you can come up with an accurate estimate of your costs. Also determine whether the fuel to run the booth will actually be available and can reach the heater. Lastly, check whether you will be allowed by your city to add a heater, even if that is not in your immediate plans yet. When you take time to look into everything, you can save your business money and time later on.